beltsiflexnew

Conveyor belts with all types of hot vulcanised profiles.
Beltsiflex belts, cleats, sidewalls, rubber sheet, assembly and repair products
SIBAN LOGO

Textile Band

foto transportadorasStandard Beltsiflex textile belts are manufactured with synthetic fabric known as EP (polyester for the tensioning ply and polyamide for the weave).This type of fabric is suitable for high stress absortion and impact resistance.They are totally resistant to moisture and are manufactured in standard widths. Nevertheless, intermediate and wider widths, up to 2600 mm, can be made to order.(Consult for wider widths).

 

Beltsiflex belts have a high breaking stregth, and their carcasses can be manufactured with values ranging from 200 N/mm to 2500 N/mm, although we recommend using steelcord reinforced carcasses starting at 1250 N/mm.

 

Belts identification is perfectly described in its denomination, where all its characteristics are defined.

 

Ej. 800 EP500/4 4+2 "W"
800 = Belt width in mm.

EP = Synthetic fabrics called EP ( polyester for the tensioning ply and nylon for the weave ).

500 = Carcass breaking stregth expressed in Newtons/mm..

/4 = Carcass manufactured with 4 EP fabrics.

4+2 = Working face and conveying surface coat in mm.

W= Rubber type and quality

 

Type Thickness mm. Weight kg/m2 Minimun driving drum mm.
EP250/2 1,80 2,00 200
EP400/3 2,70 3,00 300
EP500/3 2,85 3,90 350
EP500/4 3,60 4,00 400
EP630/4 3,80 5,20 450
EP800/4 4,70 6,00 500
EP1000/4 5,50 6,40 600

Depending on the application, have different qualities regarding abrasion resistance:

 

Abrasion resistant belts

Grade “N” anti-abrasive quality with value <150 mm³ Normally used for normal working conditions in cementfactories, smelting etc.
Grade “X” anti-abrasive quality with value <120 mm³ Good breakage resistance. Used for materials with high gradings and sharp edges.
Grade “W” very anti-abrasive quality with value <90 mm³ For convenying very abrasive fine products.

 

Flame resistant belts


textilBelts indicated for use in atmospheres with an explosion hazard. In addition to being antistatic, they are flame resistant.

* Aplications: underground mining, general transportation and unloading of cereals in ports, coal yards.

Grade “K” With fire resistant covers, unlike the rubber used in the belts carcass,which is not fire resistant. Manufactured according to DIN 22103, they are used outside the mine.
Grade “S” Thoroughly fire resistant. Manufactured according to standard DIN 22104, especially indicated for underground mining.

Oil and grease resistant belts

These belts are manufactured with synthetic rubbers. They resist the action of vegetable or animals facts and oils, materials impregnated with mineral oil, chemical or organic fertilisers, etc.

* Aplications: Waste processing plants, urban solid waste treatment, transportation of animal and plant waste, industrial parts impregnated with mineral oils, chemical or organic fertilisers.

Grade “BG” high resistance to oils and hydrocarbons.
Grade “BGM” average resistance to vegetable oils.
Grade “BGF” resistance to facts, oils and fire resistant according to ISO 280 E ISO 340.

Heat resistant belts

Suitable for conveying hot materials, they can resist high temperatures. The rubber compounds used in the cover have been designed to avoid premature aging due to contact with any source of heat.

Grade “BT” average value 130ºC and values up to 150ºC. Manufactured with rubber compounds based on sythetic butyl rubber.(SBR).
Grade “BST” average value 150ºC and values up to 200ºC. Manufactured out of butyl rubber.

Blue belts

Textiles Bleu CoucheThis type of belt is manufactured with a special blue rubber, built to be able to be in cotect with food, and also presents a general resistance to vegetable oils (grade BGM).