beltsiflexnew

Conveyor belts with all types of hot vulcanised profiles.
Beltsiflex belts, cleats, sidewalls, rubber sheet, assembly and repair products
SIBAN LOGO

Base Belt

A critical component for the reliable operation of the sidewall belt is the incorporation of fabrics or metallic wires that provide necessary transverse rigidity to the base belt.

 

Siban has developed the most advanced fabrics for this application that provide superior stability and resist the substantial forces at the critical flexing points, preventing deformation of the belt whilst retaining longitudinal flexibility.

THE USE OF CROSS STABILITY RIGID BELTS OFFERS SIGNIFICANT ADVANTAGES:

 

Provides better support on the return strand.
Avoids the wear and tear of sidewalls and cleats.
Prevents the crowning of the carrying surface al deflection points.
Prevents the loss of driving power.


A wrong selection of the appropriate band during the construction of this product, without rigid frame or with inadequate frames can cause an inadequate performance of the system or in the best case, product life would be seriously reduced.

TYPE OF BELTS

Cross stability rigid fabric belts: Type "XEM"

 

Manufactured with fabric inserts, they are produced just as the BeltSiFLEX® elevated belting systems .

They provide greater stability than the common used EP fabrics (polyester-nylon) by adding to these one or two monofilament fabrics to achieve the rigidity most suitable for the belt´s characteristics.

All XEM, EMXSC and XWXSC belt types are manufactured in the following rubber compound varieties:

N Abrasion resistant
G Oil and grease resistant
S Flame retarded
RC Heat resistant up to 150 ºC

We manufacture belts with different covers and widths other than standard ones on request.

Type Covers Thickness Weight Nº of fabrics Driving and return drum Inflexion pulleys
TOP Bottom mm. Kg/m Tensioning Weave
XEM250/2+1TR 2 0 7,00 5,89 2 1 315 350
XEM250/2+1TR 3 1,5 8,50 8,60 2 1 315 350
XEM400/3+2TR 4 2 11,50 11,25 3 2 450 500
XEM500/3+2TR 4 2 11,80 11,56 3 2 500 600
XEM630/4+2TR 4 2 12,90 12,55 4 2 600 750
XEM800/4+2TR 4 2 13,50 13,00 4 2 750 1000
XEM800/5+2TR 4 2 14,00 13,55 5 2 800 1000
XEM1000/5+2TR 4 2 14,75 14,10 5 2 1000 1200
XEM1250/5+2TR 4 2 15,85 14,80 5 2 1200 1400

 

*The diameters here indicated are merely for reference, being necessary to calculate them for each specific project.

Cross stability rigid fabric belts: Type "EMXSC"

 

Manufactured with fabric inserts, they are produced just asd the BeltSiFLEX® XEM type but differ from this in that their rigidity is achieved by inserting one or to metal cords across the band. This type of belt is recommended when the rigidity needed is not satisfied by the the XEM type. It is particularly indicated for the transportation of large prodcutions and heavy dutyappliacations requiring significant width dimensions.

Type Type of cross stability weave Nº of rigid cross weaves Nº of fabrics in tensioning plie Driving and return drum Inflexion pulleys
EMXSC800 BF500 1 EM200 4 900 1200
2 EM160 5
EMXSC800 BF800 1 EM200 5 1000 1250
2 EM160 5
EMXSC1000 BF500 1 EM200 5 1000 1250
2 EM200 5
EMXSC1000 BF800 1 EM200 5 1200 1300
2 EM200 5
EMXSC1250 BF500 1 EM250 5 1200 1300
2 EM250 5
EMXSC1250 BF800 1 EM250 5 1200 1400
2 EM250 5
EMXSC1600 BF500 1 EM250 6 1300 1500
2 EM400 4
EMXSC1600 BF800 1 EM250 6 1400 1600
2 EM400 4
EMXSC2000 BF500 1 EM400 5 1500 1800
2 EM400 5
EMXSC2000 BF800 1 EM400 5 1600 2000
2 EM400 5

 

Maximun width manufacturedn: 2.200 mm.

*The diameters here indicated are merely for reference, being necessary to calculate them for the specifications of each specific project..

Bandas Metálicas rígidas en trama tipo: "XWXSC"

This belt differs from type EMXSC in that it also incorporates metal cord tensioning along the belt and is used for the construction of big installations where the belt, not only supports high productions, but is also of large dimensions. The elongation values of this type of belts are nearly null.

The weight and thickness of these belts will depend on the rubber cover applied in each case.

Typo Type of cross stability weave Nº type of cross stability weave Drive and return pulley Inflexión pulleys
XWXSC1600 BF500 1 800 1200
2
XWXSC1600 BF800 1 900 1250
2
XWXSC2000 BF500 2 1200 1300
XWXSC2000 BF800 1 1200 1300
2
XWXSC2500 BF800 2 1500 1800
XWXSC3500 BF800 2 1600 1800
XWXSC5000 BF800 2 2300 2500

 

Maximum width manufactured: 2.200 mm.

* The diameters for both EMXSC and XWXSC belts here indicated are merely for reference, being necessary to calculate them for each specific project according to the installation´s dimensions and the qualities specified for the application.